Termites are usually useful for nutrient cycles and also bring major loses in wood structures among many other valuables. Most victims of termite destruction are hardwood floors. When a hardwood floor is fixed properly, during fresh construction or when refinishing, it is highly unlikely that you will need termite control services later on. This article will help you prevent risks of damage to your hardwood floors by termites.
It is crucial that you look at the spaces between the floor planks before starting the reconstruction. The essence of this step is to spot any pests, and especially termites under the floor. Termite control will be necessary if you observe any signs of termites. The other benefit of carrying out observations is that you will be aware of the type of floor you are dealing with. Different kinds of wood pose different levels of difficulty in refinishing. You should then begin the refinishing process after you are certain that you can refinish your hardwood floor.
After the first step, you can then carry out an adhesion test. You will choose the perfect area where you will do the adhesion test from. You should begin by cleaning the area of floor that you are dealing with using a floor cleaner. What follows after that is sanding the area using a sanding screen then clearing the excess residue from the area. The dust-free area is then ready for the application of a coat of polyurethane. You can then check on the area after about twenty-four hours. The area should be smooth apart from a few whiskers caused by dust. You can then know that your floor is ready for recoating when you press down on the coated surface using medium pressure and the polyurethane remains intact.
After the above step, bring together the materials that are essential for termite control your floors. The most of the materials that are necessary are inclusive of the hammer, nail set, pliers, edge sander, box fan, power floor buffer, polyurethane floor sealant, work gloves, hearing protection, breathing protection, industrial grade vacuum cleaner and painter’s tape. You can easily find the aforementioned materials at your neighbors or buy from home improvement store near you or online.
The steps that follow then include cleaning your floor, buffer it and then add the floor finish. By cleaning, you will be able to get rid of the gum and other gunk, as well as tough stains and deep scratches. While buffing you should know that the sanding screen will wear out after about ten to fifteen minutes. After buffering the floor, you should ensure that you get rid of any dust prior to doing the finish. Polyurethane is among the simplest to use floor finishes.